Resolve Tx Control errors

If you receive 'Tx Control' errors while working with or viewing documents in Bp Premier, some of which may cause Bp Premier to exit to desktop, Best Practice Software have made available a Tx Control Utility to resolve these issues. These error messages will start with 'TX' or 'TXTEXT', such as 'TXTEXT:SAVETOMEMORYBUFFER LINE: 36'.

Follow the instructions below on the computer that is producing TX errors. Because Bp Premier must be briefly shut down on the PC while you run the utility, you may wish to run the utility outside of normal practice hours if running the Tx utility on the server.

IMPORTANT   If Bp Premier is installed in a Terminal Server or Citrix environment, follow the steps below outside of normal practice hours, on the Terminal or Citrix Server, and ensure that there are no active sessions or user profiles connected.

  1. Close down Bp Premier on the server or workstation.
  2. Download the TX_Register32-15.exe utility from the Best Practice Software website. Your browser may report that the .exe file presents a security risk. You can safely keep this file.

    3. Unregister Tx Text Control

  3. Right-click the TX_Register32-15.exe file and choose Run as Administrator.

    4. Run As Administrator

  4. If you are shown a User Account Control screen, choose Yes.

    5. User Account Control

  5. Select Unregister Current Tx Text Control OCX and click Next.

  6. When the process has completed, click Finish.

    7. Register and reinstall TX Text Control

  7. Right click on the TX_Register 32 utility again and choose Run as Administrator.
  8. If you are shown a User Account Control screen, choose Yes.
  9. Select Re-Install TX_Register 32.
  10. Select Register Current Tx Text Control OCX and click Next.

    11. Reinstall Tx Text

  11. When the process has completed, click Finish.

You can now restart Bp Premier.

If Tx errors persist, contact Best Practice Software Support.

Last updated: 19 September 2024.